1. Place the child restraint in position.
Adjust the child restraint to its most upright position
(Recline Position #3, p. 62)
, then place it on the aircraft
seat forward-facing, as shown above.
Installing Child Restraint Forward-facing
in Aircraft
IMPORTANT: Before installing the child restraint, make sure
the aircraft seat is in a fully upright position.
71
2.
Route aircraft seat belt through forward-
facing belt path
.
Move the child restraint’s harness out of the way and
raise the access flap.
Route the aircraft seat belt buckle
through the forward-facing belt path opening on one
side, as shown,
and continue through the opening
on the opposite side of the child restraint, as shown
above.
Aircraft
Seat Belt
Forward-
facing
Belt Path
Opening
Access Flap
Forward-facing
Belt Path
Opening
Aircraft
Seat Belt
General