63
Tether straps equipped with the TruTether adjuster attach
to vehicle tether anchor brackets exactly the same as tether
straps with standard tether adjusters. TruTether adjust-
ers, however, are equipped with a Tightness Indicator that
shows, at a glance, whether the tether strap is properly
tightened. When the Tightness Indicator Display is “green,”
the tether strap is tight enough.
Using the TruTether Adjuster
Not available on all models.
TruTether Adjuster
Tightness Indicator
Display
Connect the tether hook
to the anchor behind the
vehicle seat, as shown.
Pull the strap until you see green in the tightness
indicator display. Once it has turned green, you have
removed all slack, and the tether strap is adequately
tightened. Be sure to check it periodically to make sure
the indicator is still green. If no green is showing, pull
the strap until it is.
General
To Next Page
Loading...
