37
LATCH Anchor
LATCH Anchor
Near Side
3. Attach SureLatch Connectors.
Push a SureLatch connector onto each seat anchor.
Note: You may need to vary the angle of the SureLatch
connectors, as shown above, to attach to the anchor.
Also, make sure the SureLatch assembly is in the forward-
facing belt path (p. 34).
IMPORTANT: Make sure both
SureLatch connectors are
facing upward and the straps
are not twisted.
Strap
Forward-facing Installation with
SureLatch Connectors
Far Side
Forward-facing
To Next Page
Loading...
