Evenflo Symphony 65 - Page 67

65
13 mm
(0.5
inch)
2. Hold the lap/shoulder
belts together just
behind the free sliding
buckle tongue while you
unfasten the seat belt.
3. While holding the belts
and buckle tongue,
thread the locking clip
onto the seat belt and
slide it into place.
Note: Locking clip must
be placed within 13 mm
(0.5 inch) of seat belt
buckle .
Installing the Locking Clip
4. Buckle the seat belt with
the locking clip in place .
Return to the installation procedure:
•Rear-facinginstallation–Step6,page30
•Forward-facinginstallation–Step7,page48
General