Everdure FLINDERS - Page 15

STYLE, GRILLED TO PERFECTION
FLINDERS, NORFOLK, DAINTREE & KIMBERLEY TROLLEY ASSEMBLY
THE HOLES OF THE PANEL WITH THE BASE ASSEMBLY. FOLLOW STEPS 3 & 4 FOR ATTACHING THE PANEL.
6. TO ATTACH THE BOTTOM DOOR INFILL PANEL (PART 8), PLACE THE PART INTO THE POSITION SHOWN. ALIGN
5. REPEAT STEPS 3 & 4 TO SECURE THE LARGE INFILL PANEL.
4. ATTACH 1 x 6mm DIAMETER WASHER (PART 24) AND 1 x M6 NUT (PART 19) TO THE BOLT AND FULLY
PANEL, AND THROUGH THE BASE ASSEMBLY.
3. ATTACH THE PANEL BY PLACING 1 x M6 BOLT (PART 13) THROUGH ONE HOLE IN THE LARGE INFILL
PANEL AND THE BASE PLATE.
2. PLACE THE LARGE INFILL PANEL (PART 11) INTO POSITION AND ALIGN THE HOLES OF THE LARGE INFILL
1. PLACE THE BARBECUE TROLLEY BASE IN IT'S UPRIGHT POSITION AS SHOWN.
FITTING OF INFILL PANELS TO THE BASE ASSEMBLY
TIGHTEN.
B
REAR PANEL FITTED
FINAL VIEW SHOWING
8
19
24
13
11
15