Everglades 335 CC - Page 112

112
Exterior Equipment
specications for model specic lights. Naviga-
tion lights should be replaced with the same
specication light as installed and designed by
the manufacturer. If additional lights are installed
that were not designed by the manufacturer, they
cannot interfere with the visibility or function of
the navigational lights as per ABYC A-16.8.1.
Fender Pins
Fenders are attached the cleats or to quick release
fender pins located on the gunnels. To use the
fender pins, tie a line to each fender, then tie the
line to a fender pin. Insert the fender pin into the
receiver on the gunnel and adjust the line length.
Quick Cam Cleats
Fast entry quick cam cleats are included when
the shing package option is selected and are
designed to secure outrigger halyards. They
are located below each port and starboard
gunnel at the forward end. They provide secure
line engagement and easy adjustment for the
outriggers.
To use the cam cleat, feed the outrigger line
through the black loop then through the blue jaws,
adjust outrigger line tension to your preference.
Pull the line slightly while pressing it against the
jaws to secure the line in the jaws. To release the
line, tug it slightly out and away from the jaws
until it is free.
Quick Cam Cleat
Quick Release Fender Pin