2
TABLE OF CONTENTS
SPECIAL NOTICE AND CALIFORNIA PROPOSITION 65 WARNING 3
CUSTOMER GREETING AND EXPLANATION OF PROCEDURES 4
WARRANTY AND CONTACT INFORMATION 5
SAFETY DISCLAIMER AND HF WARNING 6
SAFETY WARNINGS, DANGERS, CAUTIONS AND INSTRUCTIONS 7
GENERATOR OPERATION INFORMATION 10
SPECIFICATIONS, INCLUDING DUTY CYCLE AND INPUT AMPERAGE INFORMATION 11
DUTY CYCLE EXPLANATION 12
GETTING STARTED, UNPACK YOUR UNIT, CHECK FOR GAS LEAKS 13
CONNECTING YOUR UNIT TO THE POWER SOURCE AND WIRING INFORMATION 14
CONNECTING YOUR UNIT TO THE SHIELDING GAS 15
ADJUSTING YOUR REGULATOR 16
GUN INSTALLATION AND CONNECTING YOUR UNIT AND READYING TO WELD (POLARITY AND PANEL CONNECTIONS) 17
WIRE SPOOL INSTALLATION 18
DRIVE ROLL INFORMATION; HOW TO FEED THE WIRE THROUGH THE MIG GUN 19
TENSIONING AND TRIMMING THE WIRE 20
COMPONENT IDENTIFICATION AND EXPLANATION; FRONT PANEL 21
COMPONENT IDENTIFICATION AND EXPLANATION; REAR PANEL 22
COMPONENT IDENTIFICATION AND EXPLANATION; CONTROL PANEL LAYOUT AND USE 23
COMPONENT IDENTIFICATION AND EXPLANATION; MANUAL FUNCTION AND SCREEN LAYOUT 24
COMPONENT IDENTIFICATION AND EXPLANATION; POWERSET FUNCTION AND SCREEN LAYOUT 25
COMPONENT IDENTIFICATION AND EXPLANATION; POWERSET EXPLANATION AND PURPOSE 26
WELDING INFORMATION AND TIPS; EXPLANATION OF WELDER FUNCTIONS 27
TROUBLESHOOTING ERROR CODES 31
TROUBLESHOOTING COMMON ISSUES 32
BLANK, FOR NOTES 33
To Next Page
Loading...
