ASSEMBLY STEPS (FOLDING THE BENCH FOR STORAGE)
CAUTION
Please ensure that the Bench is securely
stored in either an upright or full flat
position away from children.
• Please set the Leg Extension
(7) and both Bolt Set (23, 24,
28 and 19, 24, 28) a side, do not
loose them.
• Before folding up the Main Frame (4), please remove Backrest Adjustment Rod (10).
Re-insert Backrest Adjustment Rod (10) after Main Frame (4) is folded to keep it in place.
• Unscrewing the M8 Locking Knob (Male) (27) then remove the Leg Extension (7). Place this
assembly to one side.
• Unscrew the rear M8 Locking Knob (Female) (28) and remove the M8 x 90mm Carriage Bolt
(19), M8 Flat Washes (23) and M8 Spring Washes (24).
• Lift up the Main Frame (4) to upright position.
Please do not trap your fingers in any moving parts.
• Unscrew the front M8 Locking
Knob (Female) (28) and remove
the M8 x 50mm Carriage Bolt
(18), M8 Flat Washer (23), and
M8 Spring Washer (24) then
fold down the Front Upright (6)
assembly.
18
To Next Page
Loading...
