19
ENGLISH
► The display will show the current alarms list
► Press the UP-DOWN keys (9-10) to scroll throu-
gh the alarms list, if an alarm is ON it is active.
► When the operation is over either press the ESC
key (4) to go back to the OPTIONS menu
ALARM LIST
Error Pr1 OFF
Error Pr2 OFF
Error Pr3 OFF
Error Pr4 OFF
Error AH OFF
Error PD OFF
► Press the MENU key (2) to display the INTER-
NAL VALUES during a working MANUAL HEA-
TING cycle.
► Press the UP-DOWN keys (9-10) to select the
INTERNAL VALUES then press the SET key (11)
OPTIONS
SETPOINT
ALARM LIST
INTERNAL VALUES
LIGHT
► The screen will display the list of INTERNAL VALUES
► Press the UP-DOWN keys (9-10) to scroll throu-
gh the INTERNAL VALUES, the temperatures
and the relays status for the unit running will be
displayed. Such values cannot be modified.
► When the operation is over either press the
ESC key (4) to go back to the OPTIONS menu or
do not work for 60 seconds.
INTERNAL VALUES
Temp cell 15°C
Humidity 40%
Temp Evap 27°C
Temp Cond - - -
Door OFF
High Pres OFF
To cancel a MANUAL HEATING cycle press the START/STOP button (5) for two consecutive
times. The display will go back to the Home screen.
To Next Page
Loading...
