Cards loading
11
IMPORTANT !
Advice about selecting cards
Only use the types of card which comply with the Dualys
printer specifications.
Do not touch the surface of the cards ; the printing
quality depends upon this.
Do not use damaged, folded or embossed cards.
Always store blank cards in a clean, dust free location.
Only use the magnetic stripe cards that comply with
ISO Standard 7810 and 7811.
In order to function correctly, the magnetic stripe must be
moulded to the card. Never use a card with a glued
magnetic stripe.
Only use smart cards that comply with ISO Standard 7816-2.
Do not print on the chip of the card.
Card thickness
The Dualys printer accepts cards from 0.25mm (10mil)
to 1mm (40mil) thickness.
To Next Page
Loading...
