Evolis Dualys - Maintenance of the Cleaning Rollers

Cleaning
16
After performing a cleaning cycle, wait 2 minutes for the cleaning fluid
to evaporate completely before using the printer again.
Maintenance of the cleaning rollers
Use the cleaning cloths (UltraClean Cleaning Kit Part Number A5011).
Cleaning cycle: before inserting every new ribbon.
Open the printer
cover. Remove the
ribbon if present
and remove the
two cleaning rollers.
Remove dust by
rubbing gently
with the cloth
over the whole
roller surface.
Once dry, replace
the two rollers in the
printer, then close
the printer cover.
max.
max. max.