Evolis EDIKIO ACCESS User Manual

EDIKIO
ACCESS
11
Removing printed cards
Once the print cycle is complete, the cards are issued into the output hopper below the card feeder. This output hopper is designed to collect the
printed cards. The printer is equipped with an output hopper with a maximum capacity of 25 cards that are 0.76 mm thick and 40 cards that are 0.50
mm thick.
Using cards that are 0.76 mm thick after extended use of cards that are 0.50 mm thick may require the rollers to be cleaned. See
Chapter 3 Cleaning the printer.
NOTE

Evolis EDIKIO ACCESS Specifications

General

Brand	Evolis
Model	EDIKIO ACCESS
Category	Printer
Language	English