18
Follow the procedure below to proceed with cleaning:
Repeatedly running the "T" shaped card through the printer cleans the cleaning roller in order to maintain print quality and extend the service life of
the print head.
1 Open the printer cover.
2 Remove the ribbon as shown on the diagram.
3 Close the cover and press until you hear a click to confirm that it is fully closed.
1 2 3
Cleaning the printer
Recommended cleaning cycle: once a year.
However, we do recommend more regular cleaning if your printer is in a dusty location or if you use it intensively.
Servicing accessory: saturated "T" shaped card. To obtain one, please contact your Edikio by Evolis reseller.
NOTE
To Next Page
Loading...
