24
COOLING MODE
• The cooling system has been
activated.
The printer pauses for a few
seconds and restarts once it
has returned to its normal
operating temperature.
FIRMWARE UPDATE
• The printer is updating its
firmware.
The printer is operational
again following the update.
The control button and the printer warning lights are lit:
PRINTER COVER OPEN
• The printer cover is open.
Close the cover. The printer
restarts.
MECHANICAL ERROR
• Card jammed in the printer.
• Mechanical component fault.
Open the cover and hold down the
control button to eject the jammed card.
For more details, refer to page 30.
If the problem persists, contact technical
support at www.evolis.com
OFF
STEADY LIGHT
FLASHING
LEGEND
To Next Page
Loading...
Need help?
General
