/19
To turn the board ON, press the ON/OFF button.
The LED light on the ON/OFF button will illuminate indicating the board is
ON.
To turn the board OFF, press the ON/OFF button again and the lights will turn
off.
TURNING THE BOARD ON / OFF
NOTE: When your board has not been used for 5 consecutive minutes, it will
automatically enter Sleep Mode to conserve power and prevent unintended
operation.
To reactivate your board. Pick up your Phaze Remote and press the brake trigger
lightly (See Smart Start pg 37).
GTR CARBON
ON/OFF BUTTON
GTR BAMBOO
ON/OFF BUTTON
NOTE - Stoke shares same ON/OFF procedure as the GTR Bamboo
To Next Page
Loading...