/20
To turn the remote ON, press the ON/OFF button. The remote will vibrate and
the ON/OFF light will turn blue.
Once ON, the LCD screen will power on and briey display the Evolve logo
and then switch to a ‘Pair Remote’ screen. This will instruct you how to pair
your remote to your board.
To turn the remote OFF, press and hold the ON/OFF button for one second or
until the screen and ON/OFF light turn off.
TURNING THE REMOTE ON / OFF
ON/OFF BUTTON
NOTE - Always turn the board on 1st and the remote on 2nd.
To Next Page
Loading...