/30
SAFETY SWITCH
SAFETY SWITCH OFF
SAFETY SWITCH ON
SAFETY SWITCH
The SAFETY SWITCH (AKA DEADMAN switch) is located under the
accelerator trigger. You must hold the SAFETY SWITCH using your 2nd
and/or 3rd nger as you engage the accelerator trigger to begin riding. The
Speed Mode display on the screen will turn a solid colour once you press the
SAFETY SWITCH.
If you do not press the safety switch in as you engage the
accelerator trigger, the board will not move.
Once you begin moving and reach speeds of 3-5 kph (2-3 mph) or above, you
will be able to accelarate freely without engaging the SAFETY SWITCH.
When you come to a stop or reach 0 kph, the need for the SAFETY SWITCH
reactivates. You must hold in the SAFETY SWITCH the next time you wish to
use the accelerator trigger again.
You do not need to hold in the SAFETY SWITCH to activate the brake.
The SAFETY SWITCH can be disabled or re-enabled by going to the
OPTIONS menu and changing DEADMAN to OFF or ON.
NOTE - DEFAULT
GTR SCREEN SHOWN
To Next Page
Loading...