EVS LSM-VIA - Infrastructure Settings

6.2.InfrastructureSettings
XT-VIAServer Settings
XT-VIAIPAddress (PCLAN)
This setting specifies the IP Address of the EVS video server to be controlled by LSM-VIA.
Total Number of LSM-VIA Connected to the Server
Description Up to 4 operators may work independently on the same server from their
respective LSM-VIA workstation and remote panel (multi-operator mode).
This setting is used to set the number of operators working with the same
EVSserver. It must be the same on each workstation.
Then, each operator must select his/her operator number thanks to the
"Operator Position" on page 21 parameter.
Possible Values From 1 to 4.
Default value 1
20| January 2022 | Issue 1.4.G