EVS LSM-VIA Installation And Configuration Manual

What'sNew
In the Installation and Configuration Manual the icon has been added next to the text to
highlight information on new or updated features.
The changes linked to new and updated features in version 1.4 are listed below.
Prerequisites
The EVS server shall run at least Multicam 20.2.
• See section "Overview" on page 3.
System settings
By default, the configuration tool opens in Chrome.
• See section "Configuring LSM-VIA" on page 18.
New system settings are available for Clip Loop Mode, Second Lever Range, PGMSpeed / VarMax.
• See section "System Settings" on page 23.
Possibility to use a network keyword file on the local workstation.
• See section "Keywords Settings" on page 30.
A setting is available to disable the pop-up display for Info and Success notifications.
• See section "Remote Settings" on page 31.
Installation
At installation, a warning message shows you the required Multicam version.
• See section "Upgrading LSM-VIA" on page 9.
INSTALLATION AND CONFIGURATION MANUAL
LSM-VIA |What's New| V

EVS LSM-VIA Specifications

General

Brand	EVS
Model	LSM-VIA
Category	Music Mixer
Language	English