Post Roll Duration (secs)
Description Specifies the duration of the Post Roll.
When the Post Roll function is activated from the Live screen or Clip screen, the
playout will continue for the duration defined by the Post Roll Duration
parameter
• after the OUTpoint of a clip, provided that there is enough media in the
guardband
• after the OUTpoint of the last playlist element, provided that there is
enough media in the guardband
Possible Values From 00s00fr to 600s00fr
Default value 02s00fr
Autoname Clips
Description If this function is enabled, the value of the selected field will automatically be
used to name the clip upon creation.
Possible Values • Disabled:
No name is assigned to the clip when it is created.
• TCIN:
The timecode of the IN point of the clip is used as clip name when the clip is
created.
• CAMName
The name of the record channel is used as clip name when the clip is
created.
• IDLouth/UmID
The ID Louth (UmID) of the clip, i.e. the unique identifier for the clip on the
XNet network, is used as clip name when the clip is created.
• VarID32
The VarID of the clip is used as clip name when the clip is created. Actually,
the clip name will be limited to the first 8 characters of the VarID.
Default value Disabled
INSTALLATION AND CONFIGURATION MANUAL
LSM-VIA |6. Configuring LSM-VIA| 25
To Next Page
Loading...
Need help?
General