EasyManuals Logo

Ewellix CAHB-2 Series User Manual

Ewellix CAHB-2 Series
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
36
CAHB-20 series
11.0 Dismantling
Personnel
• Thedismantlingmayonlybecarriedoutbyspecically
qualiedpersonnel.
• Work on the electric system may only be performed by
professional electricians.
DANGER
Electric shock and moving parts hazards
Serious injury or death can be caused by touching live electrical
components and by unexpected movement of the actuator.
Be sure power supply is off and actuator is locked out before
installing.
WARNING
Risk of injury due to incorrect dismantling!
Storedresidualpower,sharp-edgedcomponents,pinsandcorners
on the individual components or at the required tools can cause
serious injuries.
Therefore:
• Ensure there is ample space for dismantling prior to startingwith
the work.
• Usecautionwhenworkingwithopen,sharp-edgedstructural
components.
• Ensure order and cleanliness at the dismantling site! Loosely
stacked structural components or structural components and
toolsontheoormaypresentasourceforaccidents.
• Dismantle structural components professionally pursuant to ap-
plicable local regulations.
• Secure structural components in a way so they would not be able
to fall or tip over.
• Contact the manufacturer if you have any questions or concerns.
11.1 Dismantling
11.1.1 Dismantling of CAHB-20x series
Separate actuator from energy supply (⮑8.4
Disengagement in case of emergency, page 31).
1. Secureelementsoftheapplicationinsuchafashion,that
no loads can impact the hinge heads.
2. Loosen and remove fastening bolts from the mounting
strap of the hinge heads.
3. Separate linear actuator from application elements.
4. Clean actuator.
5. Carefully package for shipment to the manufacturer.
(⮑ 5.0 Transport,packaging and storage, page 21).
11.2 Disposal
To the extent that no take-back or disposal agreement has
beenputinplace,disassembledcomponentsshouldbe
recycled:
• Dispose of metals and plastic components at an appropri-
ate recycling center.
• Sort remaining components based on the respective ma-
terial and dispose of according to applicable local occupa-
tional health and environmental regulations.
CAUTION
Damage can be caused to the environment due to incorrect
disposal!
Electronicwaste,electroniccomponents,lubricantsandother
additives are subject to special waste treatment regulations and
may only be disposed of by approved specialized companies!
The local municipal authorities or specialized waste man-
agement companies can provide information concerning en-
vironmentally appropriate disposal.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ewellix CAHB-2 Series and is the answer not in the manual?

Ewellix CAHB-2 Series Specifications

General IconGeneral
BrandEwellix
ModelCAHB-2 Series
CategoryController
LanguageEnglish