EWM Taurus 355 Basic TDM - Welding Task Selection; Arcforce; Hotstart; Antistick

Design and function
MMA welding
099-005221-EW501
05.09.2016
39
5.4.2 Welding task selection
Figure 5-19
5.4.3 Arcforce
Figure 5-20
Setting:
• Negative values: rutile electrode types
• Values at zero: basic electrode types
• Positive values: cellulose electrode types
5.4.4 Hotstart
The hotstart device improves the ignition of the stick electrodes using an increased ignition current.
a) = Hotstart time
b) = Hotstart current
I = Welding current
t = Time
Figure 5-21
5.4.5 Antistick
Anti-stick prevents the electrode from annealing.
If the electrode sticks in spite of the Arcforce device, the machine
automatically switches over to the minimum current within about 1
second to prevent the electrode from overheating. Check the welding
current setting and correct according to the welding task!
Figure 5-22