BH3 Series
13
EXCELL PRECISION CO., LTD.
2-3-1 Weighing Mode
Ⅰ. Units Selection
Press the key to select the desired weighing unit.
There are 13 units available: g, ct, lb, oz, dr, GN, ozt, dwt, MM, tl.J, tl.T, tl.H and t.
. Ⅱ Precision Shifting Function ( only available for approval models)
Press the key to shift from general resolution to high resolution.
. Ⅲ Display Unit Weight Function (only available for non-approval models)
Press the key to shift between Display Unit Weight Mode and Display pcs Mode.
Ⅳ. Tare Function
1. Place the container on the platter. After stable, press the
T
key to deduct the container
weight. The display returns to zero and the tare indicator
T
is on.
2. Place the object into the container, and the net weight of the object is displayed.
3. Remove the container and the object from the platter, and the negative value of the container
weight is displayed. Press the
T
key again to re-zero and the tare indicator is off.
¾ The balance can be tarred continuously up to its full capacity.
¾ If the tare indicator
T
is still on, after pressing the
T
key to exit the tare mode.
Please press the key to zero the balance, and the tare indicator
T
will go off.
HR
HR
UNITS
→0←
ON
To Next Page
Loading...
Need help?
General
