BH3 Series
55
EXCELL PRECISION CO., LTD.
4-6-2 CHECK THE TEMPERATURE CALIBRATION VALUE
Use
or
key to check the temperature value of every calibration point and use
or
key to check the span value of that point.
When the display shows the temperature or span value, press ↵ key to exit the checking
mode.
Press MODE key to exit the setting mode and go back to main menu, the display shows
.
The point values are saved in order according to the temperature value. The lowest
temperature is saved as the 1
st
point.
Press
↵
key
Use
or
key to
check the span of 0℃.
Press
key Press
key
Press
key Press
key
Press
↵
key
Use
or
key to
check the span of 25℃.
Use
or
key to
check the span of 40℃.
To Next Page
Loading...
Need help?
General
