Chapter 2 General Function Setting
2-1 Backlight and Auto. Power Off Setting
Press key for 3 seconds to enter backlight setting (SEtbL). Press key again to
confirm. Press key to select on/oFF and press key to exit.
Auto. Power off setting: Press key for 3 seconds to enter backlight setting (SEtbL), and
then press key to select SEt oF. Press key again to confirm. Press key to
select time 0, 3,5,15 or 30 min. After selecting time, press key to save the setting or
press key to exit.
Default settings are marked by *
2-2 Simple Counting Mode
In weighing mode, hold key to enter simple counting mode and display shows “PCS
10”. Use key to select sampling number 10, 20, 50,100 or 200.
Select a sampling number, and put appropriate weight on platter, and press key.
Display shows “-------”. The scale enter counting mode after weight is stable, and display
shows the sampling number.
(Press key to select 10, 20, 50,100
or 200 and pres key to confirm)
Press key to save the setting or press key
to exit and back to sampling mode or press key
for 3 secs to back to weighing mode.
To Next Page
Loading...
Need help?
General
