Excell GWS - Other Function Settings; Other Function Settings (P4 oth); Animal Mode; Average Unit Weight

02027011 ZSME300000342
21
EXCELL PRECISION CO., LTD.
3-3 Other Function Settings (P4 oth)
Enter other funcfion settings”P4 oth” and press key to enter sub-menue setting. Press
Key to select ON or OFF in Animal mode and Auto. average unit weight. After seleting,
press key to save the setting or press key to exit without saving. After all settings
finished, press key to back to weighing mode.
 Animal mode: Use when weighing animals that are in motion. The weight value can be
held for maximum weight or when the weight is stable depending on the hold function
setting.
 Average unit weight: If the weight of the objects on platter > the previous sampling
number more than 5 pcs, and also < 200% the previous sampling number, the scale will
automatically adjust the unit weight.
 Continuous tare: If this function off, it only can be tare for once. It can not be tare until
tare cancel; If this function on, ii can be tare continuously except gross weight >
capacity.
 Default settings are marked by *
Press key to save the setting or press
key to exit without saving and back to
last step.
Print
Animal mode
Average unit
weight
.
kg
Tare range
Continuous tare
or
or
or
or
or
Foot switch
(option)
Zero
Tare
Press key to select ON or OFF*.
Press key to save the setting.
If it sets ON, in weighing mode, press
+ key to call up Hold mode.
Press key to select ON or OFF*.
Press key to save the setting.
Press key to select ON* or OFF.
Press key to save the setting.
Press key to
save the setting.
Tare range setting: Press key
to adjust value. Press or
key to move cursor. Press key
to save the setting