Excelltel MK-308 - Change the Password; Flash Time Setting; System Return to Default Setting; Setting Delay Time for Outgoing Call Transfer

7
3.2.2 Change the Password
Format: 09EFGH#
Explanation: EFGH is the new system password.
Description: to change the password of system programming.
Example: Changing the system password from “0000” to “5678”
1. We suggest changing the password before using.
3.2.3 Flash Time Setting
Format: 00F #
Explanation: F means the flash time.
F=1 ---------0.8s
F=2 ---------1.0s
F=3 ---------1.2s
F=4 ---------1.5s
F=5 ---------1.8s
Description: For active the hold and divert operating use.
In default setting: F=2 (1.0s)
Example: Set the flash time to 1.2S
3.2.4 System Return to Default Setting
Format: 0000 #
Description: The system will restart with the default factory setting.
The command has no effect on the status of enabling/disabling C.O. line.
3.2.5 Setting Delay time for outgoing call transfer
Format: 0 3 T T #
Description:T=01-99, unit is second; this time mean the time which is
from finish dialing the last number to the system start to allow system
transfer function, The system restriction time also from this time.
Default setting: Duration of time-delay being 5 seconds.
Example: Setting delay time: 8s, then input 0 3 0 8# in programming
status.