37
Explanation: Clear any settings of call forwarding for all Ext. whether
directly forwarding setting or busy (nobody available)
forwarding setting.
Format: # 28NTT
Explanation: to set No.N Ext. call transfer to external number talking time
(TT = 01-99, units: 10 seconds) The default setting is
TT=09, total 90s(80s talking time,10s alarm time )
Description: <abcd> is desired Ext number to be transferred, abcd=11 –
18(default number) N: Ext. series No ,N=1-8 (N=1 means Ext.601… N=8
means Ext.608)
1.When power failure, refer to 3.19.3, this setting will be stored or
not.
2.Transfer to external number setting is not available in this setting.
3. The settings can be inputted only for Programming Extensions
4. If the Ext is at Direct-Dialing-Out mode, you should input one
more * key before you setting.
4.12 Call Forwarding
4.12.1 Setting Call Forwarding Directly（Manager/Secretary function）
Format: # 81 abcd then hang up
Explanation: <abcd> is desired Ext number. This is at Indirect-Dialing-Out mode.
Description: Allows the Ext user to transfer incoming calls automatically to desired Ext.
Also this is Manager/Secretary function ;Use manager’s Ext. to make this
operation, abcd is the Secretary Ext. number. Allow the manager Ext user
to transfer incoming calls automatically to Secretary Ext.
Format: # 81 * ABCDEF #
Explanation: ABCDEF is a 1-16 bit number, if no enough digits, press # to
supplement it. A=0-9. This is at Indirect-Dialing-Out mode.
Description: Allows the Ext user to transfer incoming calls automatically to the desired
outside ABCDEF number.
Example: The user of Ext. 605 wants to go to 607 for work then he can
forward all the incoming calls of 605 to 607
1. In Direct-Dialing-Out mode, you should set with * # 81 abcd(or
*#81ABCDED#) and clear with*# 81#.
2. Before setting, use #81#(or#80) to clear other settings.
3. If you setting # 81 * ABCDEF #,then the setting # 81abcd is disable
automatically.
4. When power failure, refer to 3.19.3, this setting will be stored or not.
To Next Page
Loading...
