25
3.19 Transfer Operation Parameter
3.19.1 External Transfer Mode
Format: 1530#
Description: After 3 busy tone, can connect the C.O line in 5 seconds, this
is the transfer mode 1.
Format: 1531#
Description: After 10 secs busy tone, waiting the transfer Ext. to pat the
hook to reconnect the C.O.line again without off-hook, this is the transfer
mode 2.
3.19.2 External Transfer to a no answer Extension Process
Format: 1 6 2 # Call back the extension, this is default setting
1 6 3 # Can not call back
Description: If the call back extension is busy, the system will release the
C.O. line.
3.19.3 Enable/disable Call Forwarding Settings reserved when Power Failure
Format: 1 7 0 #
Description: The Call forwarding settings (refer 4.12&4.12.1&4.12.3) will
lose when the system power off.
Format: 1 7 1 #
Description: The Call forwarding settings will be stored if power failure
(system default setting)
3.20 CID functions Setting
3.20.1 Add Digits for Intercom CID
Format: 1 8 0 #
Description: Disable add digits for intercom Caller ID, this is default
setting.,this is default setting
Format: 1 8 0 kk #
Description: Add kk in intercom Caller ID number
Some CID telephone can't display the CID number less than 4 digits,
so we must add more digits for intercom CID.
3.20.2 Internal CID mode(transmit mode) setting
Format: 1 8 1 0 # FSK mode(Default setting)
1 8 1 1 # DTMF mode
1 8 1 2 # FSK mode
1 8 1 3 # DTMF mode
1 8 1 4 # Auto mode (Default setting)
1 8 1 5 # Always FSK & DTMF mode
The system can auto select C.O. line CID mode. Sometimes if system
To Next Page
Loading...
