26
can’t display CID correctly and you know the CID mode, you can use 1812#
or 1813# to set CID mode compulsively.
3.21 Ext. groups function setting
3.21.1 Assign the Exts. groups number
The extensions can be set to 2 groups, each group is from 01 to 08
and have a programmed number. Setting methods is as below(similar to
flexible code).
Format: 9 9 0 abcd #
Description: to set the first groups’ number and enable the first Exts
Group
1、The length of Exts groups number should be same to the first
extension number, and the Exts group numbers should be
different to the other extensions number.
2、Default setting is not setting.
Format: 9 9 1 abcd #
Description: to set the second groups’ number and enable the second
Exts Group.
Default setting is is not setting.
3.21.2 Join the Exts. groups members
Format: 3 9 0 #
Description: to delete all extension members in the first Exts group.
Format: 3 9 0 N
1
N
2
… N
R
* N
S
.. N
T
#
Explanation: N
1
、N
2
、N
R
、N
S
、N
T
: the Ext. series No , = 1-8 (not 01-08)
means ext 601-608
Description: In the first Exts group join in Ext. N
1
、No.N Ext.
2
、No.N
Ext.
T
、。。。
and from Ext. N
R
to No.N Ext.
S
in sequence members.
Example: to join Ext.601、Ext.602、and Ext.605 …to Ext.608(include
Ext.608) in sequence to be the first Exts.group member,then input 290 1 2
5 * 8 #.
After setting,when you dial the first Exts group number (such as 20 refer
3.21.1 ),the Ext.601 Ext.602、Ext.605 and Ext.608 will ringing at the same
time.
Format: 3 9 1 #
Description: to delete all extension members in the second Exts group.
Format: 3 9 1 N
1
N
2
… N
R
* N
S
.. N
T
#
Description: In the second Exts group join in Ext. N
1
、No.N Ext.
2
、No.N
Ext.
T
、。。。
and from Ext. N
R
to No.N Ext.
S
in sequence members.
1、The first Exts group members is join by the extensions from 601-604
in default setting.
2、The first Exts group members is join by the extensions from 605-608
in default setting.
To Next Page
Loading...
