EasyManua.ls Logo

Excelltel MK-308 - Clear Permission of Certain Group; Clear All Permission; Calling Time Restriction Setting; Clear

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
waiting(no extensions ringing),this is default setting.
Format: 1 5 4 1#
Description:When multiple external lines calling in, because
auto-attendant just one or two lines, some one external line calling just can
be waiting, the system can be set to ring the operator mode ringing
extension(refer3.10.1&3.10.2) and will not lose any calling.
3.9.3 Auto-attendant Mode no dial Process
Format: 1 6 0 # this is default setting
Description: In auto-attendant mode, if the C.O. line doesn't dial the
extension number over 5 seconds or more after hearing the OGM, then the
C.O. line will be hung up.
Default setting: The C.O. line will be hung up if no dialing.
Format: 1 6 1 # or 1610#
Description: In auto-attendant mode, if the C.O. line doesn't dial the
extension number over 5 seconds or more after hearing the OGM(no
dialing in The DISA), then the C.O. line will be transferred to Operator or
the Ext.Group (setting see below).
Format: 1 6 1 1# transfer to the first Exts.Group
1 6 1 2# transfer to the second Exts.Group
Description: The system will call the setting extension group when no
dialing in The DISA (OGM)
NOTE:Exts.Group setting refer3.10.1&3.10.2
Format: 1 6 1 6 #
Description: The system will call the operator attendant mode Ringing
Extensions refer to user manual .
3.9.4 Called Extension Busy Process
Format: 165#
Description: when the outside user dialing the extension in auto-attendant
mode,and the called extension is busy,then the system cut off the line; this
is the default setting.
Format: 1650#
Description: when the called extension is busy, the call transferred to
operator.
Format: 1651# to transfer to the first Exts.Group.
Format: 1652# to transfer to the second Exts.Group.
Description: when the called extension is busy ,The system will call the
setting extension group.
Format: 1656#
Description: when the extension line busy, the call transferred to the
operator attendant ringing extension.
Above setting just for one paragraph OGM mode.
Format: 1655# when calling Ext. busy, send prompt tone to the
extension

Table of Contents

Related product manuals