EXE RISE D8 - Identification

20 / 64
3.2 IDENTIFICATION
The chain hoist EXE-Rise are uniquely identified by a serial number carved on the hoist body. The
manufacturer RWM marked years of construction too.
Figure 3 “EXE-Rise chain hoist serial number”
Accordance with the procedure that RWM Srl has established, EXE-RISE hoists are encoded as follows:
XRH + A + B + CCC+ DDD+ EE + F
CODE
FORMAT
DESCRIPTION
TYPE
XRH
EXE-Rise chain Hoist
----
A
version hoist number
1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 ….
B
type of control and limit
switch size
D=Direct
Control
L= Low Voltage
Control - limit
switch 50 m
M= Low
Voltage
Control - limit
switch 30 m
N= Low
Voltage
Control - limit
switch 30 m -
RWM
N= Low Voltage Control -
limit switch 75 m
V=EXE-Vario 20 m/min
CCC
load capacity/10
015 =150 kg
025=250 kg
030 =300 kg
050 =500 kg
060 =600 kg
080=800kg
100 =1000 kg
120 =1200 kg
200 =2000 kg
DDD
model hoist
S8- = D8 SF 8:1
D8- = D8 SF 5:1- 1 brake
D8+ = D8+ SF 10:1
DB- = D8 SF 5:1- 2 brake
EE
chain length in meter
max length = 100 m / 220 lbs
F
chain bag size
XS
S
M
L
X (XL)
Table 4 “EXE-Rise chain hoist identification”
For example LT XRH1D100DB-20M is EXE-Rise chain hoist D8 bouble brake direct control with WLL
1000kg, chain bag size M and with 20m of chain.