36 / 64
3.5 TECHNICAL DATA
- 4 x 1.5 mm
2
power cable fitted with CEE 16A 6h 400VAC – 3PH +G black plug.
- 4 x 1.5 mm
2
control cable fitted with CEE 16A 4h 24VAC – 3PH +G black plug (LVC only).
- Internal 25VA transformer: 400VAC on the primary windings, and 24VAC on the secondary
windings.
- Delay fuse 100 mA (0.1 A) on the primary windings, and rapid fuse 1 A on the secondary windings.
- Three-pole Schneider Electric series LC2-K09 reversing contactors with 24 V AC coil for a rated
power of 4 kW (AC3/400V).
- Mechanical limit switch 4 position with manual cam adjustment.
- Maximum control (Low Voltage Control) cable length attachable to motor: 50 m.
- Maximum chain length managed by low voltage control hoist: 60 m for single fall models and 30 m
for double fall models.
Other voltages and frequency are available on request.
For fully markets the chain hoist configuration available is 208VAC - 3 @ 60Hz. Custom configuration are
also possible, please refer to your local EXE TECHNOLOGY representative for all information.
To Next Page
Loading...
