Exmark QUEST E Series - Positioning the Seat

Operation
g035118
Figure17
Forcuttingheightsabove3.5inches(90mm)usethe
bottomhole.Therollerswillstillbeeffectiveagainst
scalping.
1.Anti-scalproller
mountingbracket
2.Cuttingheight
•For50and54InchModels:
g015168
Figure18
Forcuttingheightsabove31/2inches(90mm)usethe
bottomhole.Therollerswillstillbeeffectiveagainst
scalping.
1.Anti-scalproller
mountingbracket
2.Cuttingheight
4.Torquehardwareto27-33ft-lb(37-45N-m)or
lossofrollermayresult.
PositioningtheSeat
Theseatcanmoveforwardandbackward.Position
theseatwhereyouhavethebestcontrolofthe
machineandaremostcomfortable.
•E-SeriesModels:
1.Tiptheseatforward.
2.Loosentheadjustmentbolts.
g237245
Figure19
1.Adjustmentbolt
3.Movetheseattothedesiredpositionand
tightenbolts.
4.Tiptheseatbacktotheclosedposition.
•X-andS-SeriesModels:
1.Pushtheadjustmentlevertowardsthecenter
ofthemachinetoreleasetheseatadjuster
track(Figure20).
g237277
Figure20
1.Adjustmentlever
2.Movetheseattothedesiredpositionand
releasethelevertolockinthatposition.
33