Exmark QUEST E Series - Pushing the Machine by Hand

Operation
2.Locatethetrackingadjustmentboltnearthe
motioncontrolleveronthesidethatneeds
adjusting(Figure23).
Note:Raisetheseatforeasieraccesstothe
adjustmentbolt.
3.Rotatethebolttodecreasethespeedforthe
wheel.
Note:Rotatetheboltasmallamounttomake
minoradjustments.
g294926
Figure23
1.Bolt
4.Startthemachineanddriveforwardacrossaat,
levelsurfacewiththemotioncontrolleversfully
forwardtocheckifthemachinetracksstraight.
Repeattheprocedureasneeded.
PushingtheMachineby
Hand
Important:Alwayspushthemachinebyhand.
Nevertowthemachinebecausedamagemay
occur.
ToPushtheMachine
1.Parkmachineonlevelground,disengagetheblade
controlswitch,engagetheparkingbrake,stop
engine,andremovekey.Waitforallmovingparts
tostopbeforeleavingtheoperator’sposition.
2.Locatethebypassleversontheframeonboth
sidesoftheengine.
3.Movethebypassleversforwardthroughthekey
holeanddowntolocktheminplaceasshownin
Figure24.Ensurethisisdoneforeachlever.
4.Turntheignitionkey“ON”butDoNotstartthe
engine.Releasetheparkingbrake.
•ForE-andS-SeriesModels,moveonecontrol
leverinwardtotheneutraloperateposition.
•ForX-SeriesModels,pushthebrakelever
forwardanddown.
Themachineisnowabletobepushedbyhand.
g333974
Figure24
1.Bypassleverlocation
3.Leverpositionfor
pushingthemachine
2.Leverpositionfor
operatingthemachine
5.Whennished,ensurethekeyhasbeenreturned
tothe“OFF”positiontoavoiddrainingthe
batterycharge.
35