Exmark VANTAGE User Manual (English)

Questions and Answers:

S
Stephen MartinSep 6, 2025
What to do if Exmark VANTAGE blades do not rotate?
- W
  williamsmelissaSep 6, 2025
  If the blades on your Exmark Lawn Mower do not rotate, it could be due to the drive belt being off the pulley, the deck belt being worn, loose, or broken, the deck belt being off the pulley, or a broken or missing idler spring. Check the belt for damage and replace if necessary, install the drive belt and check adjusting shafts and belt guides for correct position, install a new deck belt, install the deck pulley and check the idler pulley, idler arm and spring for correct position and function, or replace the spring. If the electric clutch is damaged, contact an Authorized Service Dealer.
M
Michael MurphySep 7, 2025
How to fix Exmark VANTAGE that pulls to one side?
- M
  mercedeslunaSep 7, 2025
  To correct an Exmark Lawn Mower pulling to the left or right, check the tire pressure in the drive tires and adjust as needed. Also, adjust the tracking by turning the turnbuckle on the LH side in small increments until the mower tracks correctly.
C
Christopher BarkerSep 9, 2025
What to do if Exmark VANTAGE does not drive?
- K
  Kyle CarterSep 9, 2025
  If your Exmark Lawn Mower isn't driving, make sure the bypass valve is tightened. If that's not the issue, the drive or pump belt may be worn, loose, or broken, or it may have come off a pulley, in this case you should replace the belt.
K
Kevin ReyesSep 12, 2025
How to fix uneven cutting height on my Exmark Lawn Mower?
- D
  David SanchezSep 12, 2025
  To fix an uneven cutting height on your Exmark Lawn Mower, consider these potential causes: the blades may not be sharp, cutting blades may be bent, the mower deck may not be level, or the underside of the mower may be dirty. Also, check that the tire pressure in the drive tires is correct. Try sharpening the blades, installing new cutting blades, leveling the mower deck from side-to-side and front-to-rear, cleaning the underside of the mower, and adjusting the tire pressure in the drive tires. If the blade spindle is bent or the tips of adjacent blades are at an uneven cutting height, contact an Authorized Service Dealer.
C
Cynthia ShannonSep 12, 2025
How to fix uneven cutting height on Exmark Lawn Mower?
- L
  lbradfordSep 12, 2025
  To address uneven cutting height with your Exmark Lawn Mower: * Sharpen the blades if they are not sharp. * Install new cutting blades if the current ones are bent. * Level the mower deck from side-to-side and front-to-rear. * Clean the underside of the mower deck if it's dirty. * Adjust the tire pressure in the drive tires. * If the blade spindle is bent, or tips of adjacent blades are at an uneven cutting height, contact an Authorized Service Dealer to check for damage to mower deck.
D
Derek ThompsonSep 14, 2025
Why is my Exmark VANTAGE Lawn Mower vibrating abnormally?
- T
  tcooperSep 14, 2025
  Abnormal vibration in your Exmark Lawn Mower can stem from several issues. The cutting blades may be bent or unbalanced, the blade mounting bolt might be loose, the engine mounting bolts could be loose, or a pulley (engine, idler, or blade) may be loose. It is also possible that the belt is damaged. Try installing new cutting blades, tightening the blade mounting bolt, tightening the engine mounting bolts, or tightening the appropriate pulley. If the engine pulley is damaged or the blade spindle is bent, contact an Authorized Service Dealer. Consider installing new belt.