Explorer KALLIO 50 - Page 115

SPECIFICATIONS
EAU10122
8-2
Front suspension
Type
Telescopic fork
Spring/shock absorber type
Coil spring/oil damper
Rear suspension
Type
Unit swing
Spring/shock absorber type
Coil spring/oil damper
Electrical system
Ignition system
CDI
Charging system
CDI magneto
Battery
Model
YTX4L-BS
Voltage, capacity
12 V, 4.0 Ah
Headlight
Bulb type
Halogen bulb
Bulb voltage, wattage x quantity
Headlight
12 V, 35 W/35.0 W x 1
Tail/brake light
12 V, 5.0 W/21.0 W x 1
Front turn signal light
12 V, 10.0 W x 2
Tire air pressure
(measured on cold tires)
Front
2.0bar
Rear
2.0bar
Front wheel
Wheel type
Cast wheel
Rim size
10 x 2.5 (10”) or 12X2.5(12”)
Rear wheel
Wheel type
Cast wheel
Rim size
10 x 2.5 (10”) or 12X2.5(12”)
Front brake
Type
Single Hydraulic disc brake
Operation
Right hand operation
Recommended uid
DOT 3 or 4
(CASTROL SUPER DISK BRAKE
FLUID DOT 4.)
Rear brake
Type
Mechanical Drum brake (110mm)
Operation
Left hand operation
Manufacturer/model
160mm(10” RIM) or 190mm(12” RIM)
KENDA / K-324 (10” RIM)
CHENG SHIN / C-6031R(12” RIM)
Rear turn signal light
12 V, 10.0 W x 2
License plate light
12 V, 5.0 W x 1
Meter lighting
12 V, 2 W x 1
Meter lighting (fuel meter)
12 V, 2 W x 1
High beam indicator light
12 V, 2W x 1
Oil level warning light
12 V, 3 W x 1
Turn signal indicator light
12 V, 3 W x 1
Fuses
Main fuse
10.0 A