OPERATION AND IMPORTANT RIDING POINTS
EAU10122
5-1
Before riding the scooter, please
make sure that you are fully fimi-
liar with all operating controls &
their functions before riding. To
consult a Explorer dealer shop if
you not thoroughly understand.
Please do not start the engine in
a closed area, the exhaust air
are poisonous, and inhaling
them can cause loss of con-
sciousness and even death in
short time.
Starting and warming up a
cold engine
See page 5-4 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
1. Engine start switch “ ”
1. Turn the key to “ ”, and when
the 2-stroke engine oil level warn
-ing light comes on, turn the key
to ON “ ”.
If the 2-stroke engine oil level warn-
ing light does not come on, have a
Explorer dealer check the electrical
circuit.
3. Close the throttle completely.
1. Kickstarter lever
4. Start the engine by pushing the
start switch or by pushing the
kickstarter lever down, while apply-
ing the front or rear brake.
NOTE:
If the engine fails to start by pushing
the start switch, release the switch, wait
a few seconds, and then try again. Each
CAUTION:
CAUTION:
1
1
To Next Page
Loading...