MAINTENANCE MANUAL EXTRA 300/SC
CHAPTER 57
PAGE 3
PAGE DATE: 16. June 2008
57-00-00 GENERAL
Description and Operation
The wing consists of a one-piece, dual chamber main spar
with carbon fibre roving caps and carbon fibre webs. For the
spar core PVC foam is used. The wing shells are a honey-
comb sandwich construction with carbon fibre laminates. To
prevent buckling of the shells, plywood ribs are used.
The layer sequence of the wing is shown in Figure 1.
All composite parts, as protection against moisture and UV
radiation, are coated with an unsaturated polyester gel-coat,
an acrylic filler and finally with an acrylic paint.
For repair of composite parts refer to Chapter 51.
Removal
Reverse procedure of installation omitting step 12.
To Next Page
Loading...
