Installing a Summit X670 Series Switch
Summit Family Switches Hardware Installation Guide
293
4 Slide the switch into the equipment rack (Figure 239).
Figure 239: Installing the Summit X670 Series Switch
5 Secure the mounting bracket flanges to the rack, using screws that are appropriate for the rack.
(Rack-mounting screws are not provided.)
6 Ground the switch.
a Strip 0.25 inch from the end of the AWG # 14 copper wire.
b Securely crimp the provided ring terminal onto the stripped wire.
c Insert the provided M4 screw through the ring terminal and into the grounding stud on the front
of the switch (Figure 240).
d Securely tighten the screw.
Figure 240: Grounding a Summit X670 Series Switch
SH_256
SH_259
To Next Page
Loading...
