Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
All rights reserved. DRAFT. October 20, 2011
Summit Family Switches Hardware Installation Guide
11
Preface
This guide provides the instructions and supporting information needed to install the following
Extreme Networks
®
Summit
®
family switches:
● Summit X150 series switches
● Summit X250e series switches
● Summit X350 series switches
● Summit X440 series switches
● Summit X450 series switches
● Summit X450a series switches
● Summit X450e series switches
● Summit X460 series switches
● Summit X480 series switches
● Summit X650 series switches
● Summit X670 series switches
The guide includes information about site preparation, switch functionality, and switch operation.
The various Summit switch series are called the Summit family switches when referred to collectively.
Audience
This guide is intended for use by network administrators responsible for installing and setting up
network equipment. It assumes a basic working knowledge of:
● Local area networks (LANs)
● Ethernet concepts
● Ethernet switching and bridging concepts
● Routing concepts
● Simple Network Management Protocol (SNMP)
● Basic equipment installation procedures
See the ExtremeXOS Concepts Guide and the ExtremeXOS Command Reference Guide for information about
configuring Extreme Networks Summit family switches.
If the information in an installation note or release note shipped with your Extreme Networks equipment
differs from the information in this guide, follow the installation or release note.
To Next Page
Loading...
Need help?
General
