Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
All rights reserved. DRAFT. October 20, 2011
Summit Family Switches Hardware Installation Guide
107
The Summit switches listed in each section of this chapter run ExtremeXOS software. For information
about compatible switches running ExtremeWare
®
software, refer to the Consolidated “i” and “e” Series Hardware
Installation Guide.
EPS-160 External Power Module (with EPS-T)
The EPS-160 External Power Module (Model 10907) is a modular power supply for use with the
EPS-T chassis. You can use the EPS-160 as a redundant power supply with the following Extreme
Networks switches:
● Summit X150-24t switch
● Summit X150-24x switch
● Summit X150-48t switch
● Summit X250e-24t switch
● Summit X250e-24x switch
● Summit X250e-48t switch
● Summit X450-24t switch
● Summit X450-24x switch
The EPS-T is a rack-mountable chassis or tray that holds one or two EPS-160 power supplies. Each
EPS-160 power supply provides one-to-one redundancy for an attached Extreme Networks switch.
You can order the EPS-T chassis with one or two EPS-160 power supplies already installed. You can also
order an additional power supply from your Extreme Networks reseller.
The front of the EPS-160 unit has a green LED to indicate operating status (
Table 31).
Summit X450e Series Switches
Summit X450e-24p EPS-LD External Power Supply Unit 45019
EPS-500 External Power Supply Unit 10911
Summit X450e-48p EPS-600LS External Power Module with
EPS C Chassis
EPS-600LS: 10913
EPS-C: 10912
Summit X450e-24t EPS-500 External Power Supply Unit 10911
Summit X450e-48t EPS-500 External Power Supply Unit 10911
Table 31: LED Meanings on the EPS-160 Power Supply
Power LED Meaning
Green, solid The external power supply is operating normally.
Off The external power supply is not connected.
Table 30: Summit Switch and EPS Compatibility (Continued)
Switch Model Compatible EPS Model Number
To Next Page
Loading...
Need help?
General
