Extreme Networks Virtual Services Platform 7200 Series User Manual

6. Use the following steps to secure the rack rails to the frame:
a. Orient the rack rail so that the end with the black retaining latch is facing front.
b. Adjust the length of the rack rail so it fits the rack depth by loosening the two screws on
the rack rail and adjusting the length. Make sure the screws are tight before you install
the slides in the rack.
Installing the switch in an equipment rack
March 2020 Installing the VSP 7200 Series 53

Extreme Networks Virtual Services Platform 7200 Series Specifications

General

Brand	Extreme Networks
Model	Virtual Services Platform 7200 Series
Category	Switch
Language	English