Extreme Networks Virtual Services Platform 7200 Series User Manual

b. Pull the blue latches on the chassis rails towards the front and slide the switch into the
frame.
Note:
After you install the switch in a rack, slide it out until the lock (shown above) engages.
To slide the switch back into the rack, push the blue release latches on the chassis rails
towards the back and slide the switch into the frame.
8. Connect power and network connections to the switch.
Installing the Virtual Services Platform 7200 Series
March 2020 Installing the VSP 7200 Series 56

Extreme Networks Virtual Services Platform 7200 Series Specifications

General

Brand	Extreme Networks
Model	Virtual Services Platform 7200 Series
Category	Switch
Language	English