Extreme Networks Virtual Services Platform 7200 Series User Manual

8. Use the countersink screws with the following steps to attach the extension bracket to the
rack rail:
a. Push the blue release lock up and slide the middle rail out as far as possible.
b. Note the order and position of how the components are installed. The extension bracket
(with the flat side down) goes on top of the rack rail and then the long rear bracket
slides into the extension bracket.
c. Orient the extension bracket over the holes in the rack rail.
Installing the switch in an equipment rack
March 2020 Installing the VSP 7200 Series 63

Extreme Networks Virtual Services Platform 7200 Series Specifications

General

Brand	Extreme Networks
Model	Virtual Services Platform 7200 Series
Category	Switch
Language	English