Extreme Networks VSP 4900 Series Hardware Installation Guide

VIM5s are ordered separately. Each VIM5's label can be found on the bottom side of the device, as seen
in the following figure:
Figure 3: VIM5 Label
1 = VIM5 label
Table 6: VSP 4900 VIM5 Matrix
VIM5-4X VIM5-4XE VIM5-2Y VIM5-4YE VIM5-2Q
Usable ports 4 4 2 2 1
Operational
speeds
1Gbps & 10Gbps 1Gbps & 10Gbps 10Gbps & 25Gbps 10Gbps & 25Gbps 4x10Gbps w/
channelization &
40Gbps
PHY present No Yes Yes Yes No
1000BASE-T &
10GBASE-T
10GBASE-T only Both 10GBASE-T only 10GBASE-T only -
Mixed speeds 1Gbps & 10Gbps 1Gbps & 10Gbps Not supported* Not supported* -
1G Auto-
negotiation
Disabled Enabled - - -
10G Auto-
negotiation
Disabled Disabled Disabled Disabled -
25G Auto-
negotiation
- - Disabled Enabled for DAC
Disabled for Fiber
-
FEC - - - Auto-FEC
enabled for DAC
and Fiber
-
MACsec - 256bit - 256bit -
* The user must set vim-speed to 10G or 25G for VIM5-2Y. The default is 25G.
Expansion Modules
VSP 4900 Series Switches: Hardware Installation Guide 14

Extreme Networks VSP 4900 Series Specifications

General

Brand	Extreme Networks
Model	VSP 4900 Series
Category	Switch
Language	English