Extreme Networks VSP 4900 Series Hardware Installation Guide

You can purchase a power cord for your product and for your specific country from your local Extreme
Networks Channel Account Manager or Sales Manager, or you can purchase a cord from your local
supplier. Requirements for the power cord are listed in the Technical Specifications for your product.
To locate a Sales Manager or Partner in your region, visit www.extremenetworks.com/partners/where-
to-buy.
Note
This equipment is not intended to be directly powered by power distribution systems where
phase-phase voltages exceed 240 VAC (2P+PE), such as those used in Norway, France, and
other countries. For these applications it is recommended that a transformer be used to step
down the voltage to < 240 VAC from phase-phase, or that you make a connection to a (P+N
+PE) power distribution where voltages do not exceed 240 VAC.
All installations should confirm that the product is reliably grounded according to the
country’s local electrical codes.
Battery Notice
Warning: This product contains a battery used to maintain product
information. If the battery should need replacement it must be replaced by
Service Personnel. Please contact Technical Support for assistance.
Risk of explosion if battery is replaced by an incorrect type. Dispose of
expended battery in accordance with local disposal regulations.
Attention: Ce produit renferme une pile servant à conserver les
renseignements sur le produit. Le cas échéant, faites remplacer la pile par le
personnel du service de réparation. Veuillez communiquer avec l’assistance
technique pour du soutien.
Il y a risque d’explosion si la pile est remplacée par un type de pile incorrect.
Éliminez les piles usées en conformité aux règlements locaux d'élimination
des piles.
Battery Warning - Taiwan
Safety and Regulatory Information
VSP 4900 Series Switches: Hardware Installation Guide 72

Extreme Networks VSP 4900 Series Specifications

General

Brand	Extreme Networks
Model	VSP 4900 Series
Category	Switch
Language	English