Extron electronics CrossPoint 450 Plus Series - Page 25

19CrossPoint / MAV Matrix Switchers • Installation
Command SIS command
(host to switcher)
Response (switcher to host)
Aditional information
Lock (executive) modes
NOTE: See Setting the front panel locks (Executive modes) on page 19 for more information on the Lock modes.
Lock all front panel functions
1X
Exe1
]
Enable Lock mode 1.
Lock advanced front panel functions
2X
Exe2
]
Enable Lock mode 2.
Unlock all front panel functions
0X
Exe0
]
Enable Lock mode 0.
View lock status
X
X&]
Information requests
Information request
I
V
X*
X
X(
•A
X*
X
X(]
V
X*
X
X(
is the video matrix size.
A
X*
X
X(
is the audio matrix size
Example:
MAV Plus 3216 HDA
I
V32X16•A32X16
]
Request part number
N
X1)]
Query controller rmware version
Q
X1!]
Example:
Q
1.23
]
The factory-installed controller rmware version is 1.23 (sample value only).
KEY: X& = Lock mode 0,
1
, or
2
X* = Inputs Total number of inputs for this switcher X( = Outputs Total number of outputs for this switcher X1) = Part number 68-nnnn-nn X1! = Firmware version number to second decimal place (x.xx)