Extron electronics IPCP Pro 550 User Manual

IPCP Pro Series • Reference Information 32
Reference Information
This section of the guide includes the following reference items:
• Network Requirements
• File Types: a Key to Extron-specific File Names
• Licensed Third-Party Software Used in the Control Processors
Full product specifications are available via the IPCPProSeries product pages at
www.extron.com.
Network Port Requirements
Network administrators may find it useful to know which ports, protocols, and
services are used by the IP Link Pro control processors, TouchLink Pro Touchpanels,
Global Configurator Plus and Professional software, Toolbelt, and Extron Control for iPad (for
IP Link Pro control sytems). The following tables provide that information as a reference for
network planning and troubleshooting. The following definitions apply:
• Inbound — The Extron control hardware listens for inbound traffic on the specified port.
• Outbound — The Extron control hardware sends outbound traffic to the specified port.
IP Link Pro Control Processors
Ports and Protocols for Control Processors
Inbound/
Outbound
Port Protocol Service Description
Inbound 80 TCP HTTP Port redirects to HTTPS
Inbound/
Outbound
123 UDP NTP NTP service
Inbound 443 TCP HTTPS Default Web pages, GlobalViewer,
Extron Control for Web
Inbound/
Outbound
4502 UDP Discovery Broadcast network discovery
Inbound 4503 TCP SSH Internal system messaging
Outbound 4504 UDP Trace Extron trace messages
Inbound 4522 TCP SFTP File transfer
Outbound 5555
(config-
urable)
UDP GVE GVE protocol
Outbound Various TCP/UDP Drivers Outbound connections for Ethernet
device control

Extron electronics IPCP Pro 550 Specifications

General

Brand	Extron electronics
Model	IPCP Pro 550
Category	Processor
Language	English