IPCP Pro Series • Introduction 3
Network and configuration features
• Global compatibility — The IPCP uses industry standard Ethernet communication
protocols, including DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH,
TCP/IP, and UDP/IP.
• Embedded Web pages — The IPCP embedded Web pages include online
diagnostics and monitoring of basic features.
• Network switch — The IPCPPro350 and IPCPPro350M include an unmanaged
3port switch which supports 10Base-T up to gigabit (1000Base-T) Ethernet
communication. Connect any one of these ports to the LAN for communication with the
IPCP. Connect the other two ports to devices such as TouchLink Pro touchpanels and
network-controlled AV devices.
• Remote equipment management — The IP Link Pro connection allows you
to remotely manage, monitor, and control several Ethernet-enabled products such
as projectors, cameras, video conferencing equipment, switchers, and other AV
equipment. The IPCP provides support for the following:
• TCP, UDP, and HTTP connections
• Password protection using secure communication
• Up to 32 (GCProfessional) or 8 (GCPlus) Ethernet devices at a time depending on
the configuration mode
• Connection via IP address or host name
• Multi-level password protection — Allows security to be set based on user roles.
• System asset management — The configured system and control processor allow
you to control, monitor, and schedule various functions of devices in the system.
• E-mail notification — The IPCP can be set up to send e-mail notifications, such as a
notice that a projector has been disconnected or the projector lamp has been used for
a designated number of hours.
Each IPCPProSeries control processor offers
up to 4.5MB of flash memory for storing
Extron GlobalViewer and user-supplied Web
pages, configuration settings, and device
drivers. Data in flash memory is served at a
transfer rate of 6 Mbps (megabits per second).
SDRAM: 512 MB
Flash: 4.5 GB
Public vs. private LAN
ports?
To Next Page
Loading...
Need help?
General
